Introduction to the weaving methods and characteristics of stainless steel wire mesh

Introduction to the weaving methods and types of stainless steel wire mesh
: 1. Plain weave:
Each warp wire crosses over each weft wire
A weaving method in which each weft wire crosses over each warp wire. 
2. Twill weave:
Each warp wire crosses over every two weft wires A
weaving method in which each weft wire crosses over every two warp wires. 
3. Dense plain weave:
Each warp wire crosses over a weft wire
A weaving method in which each weft wire crosses over a warp wire. The
sum of the weft wire diameters is a25.4mm≤a28mm 
4. Dense twill weave:
Each warp wire crosses over every two weft wires
A weaving method in which each weft wire crosses over every two warp wires. The
sum of the weft wire diameters is a50.8mm≤a≤56mm 
5. Three-heald weave:
Each warp wire crosses over every one and every two weft wires, and each weft wire also crosses over every one and every two warp wires.
Weaving method that passes  under
6. Five-harness weaving:
Each warp wire crosses over each and every 4 weft wires
Weaving method that each weft wire crosses over each and every 4 warp wires. Or each warp wire crosses over every 2 and every 3 weft wires. Each weft wire crosses over every 2 and every 3 warp wires.