GFW stainless steel wire mesh/screen/industrial metal wire woven screen model types and standards introduction

GFW stainless steel wire mesh/screen/industrial metal wire woven screen model types and standards introduction

GFW stainless steel screen GB/T-5330-2003 industrial metal wire woven square hole screen. Its specifications are commonly used: GFW + screen model + material brand + weaving method

For example: GFW 3.15/0.8-304 plain weave means: Industrial square hole screen model: 3.15mm/0.8mm stainless steel 304 material plain weave mesh.

This standard applies to metal wire woven square hole mesh for screening of solid particles, filtering of liquids and gases and other industrial purposes. The basic mesh size is: industrial metal wire woven square hole mesh of 0.02-16mm.

Material: 302 304 304L 316 316L

Specification: 0.6m - 2.0m width 1 mesh - 200 mesh

GB/T-5330-2003 Industrial Metal Wire Braided Square Hole Screen is woven by plain or twill weaving process, with good air permeability and light transmittance. The product is high-grade and widely used.

use: 

1. Used for screening and filtering in acidic and alkaline environments, as mud nets in the petroleum industry, as screens in the chemical and chemical fiber industries, and as electroplating... 

2Used in mining, petroleum, chemical, food, medicine, machinery manufacturing and other industries. ... 

3: Used for screening and filtering under acidic and alkaline conditions, as mud nets in the petroleum industry, as screens in the chemical fiber industry, and as pickling nets in the electroplating industry. Our factory can design and manufacture various types of products according to user needs... 

Industrial square hole screen materials: 304, 316, 316L, 321, 304L, etc.

GB/T-5330-2003 Industrial Wire Braided Square Hole Screen Available from Stock:

GFW 3.15/0.8 06cr18ni11ti

GFW 2/0.5 06cr18ni11ti 

GFW 6.3/1.8 06cr18ni9ti

GFW 3.15/1.25 06cr18ni9ti

GFW 0.8/0.28 0cr18ni9 

GFW 0.8/0.315 0cr18ni9

GFW 1.25/0.5 0cr18ni9

GFW 0.63/0.224 304

GFW 0.25/0.16 304

GFW 0.2/0.11 304

GFW 4.08/1.0 321

GFW 0.8/0.28 plain weave 304

GFW 0.8/0.315 plain weave 304

GFW 1.25/0.5 Plain 304

GFW 2.26/0.91 Plain 321

GFW 0.315/0.2 Plain 316L

GFW 1.6/10 Plain 316

GFW 3.0/0.7 Plain 316

Stainless steel wire mesh products have a lot of professional terminology, such as aperture diameter, wire diameter, opening rate, etc. The common markings are: d represents the wire diameter and w represents the aperture. For example, the stainless steel wire mesh produced by the wire mesh factory is marked as SD40/25, which means that the wire diameter of the wire mesh is 25 microns and the aperture is 40 microns.

GFW stainless steel wire mesh metal mesh GF1W, GF2W, GF3W metal wire woven square hole mesh is mainly used for solid particle screening, fluid filtration, decoration, dust prevention, skeleton support, etc. Only 1 grade stainless steel wire mesh screen is produced strictly according to the standard GB/T5330-1985 requirements to produce R10, R20, R20/3, R40/3 screen mesh series, mesh size 10mm-0.022mm (2-550 mesh),

Industrial metal wire woven square hole screen currently implements the national standard of wire mesh :

GB/T5329-1985 "Test sieves and screening test terms"

GB/T-5330-2003 Industrial Metal Wire Weaving Square Hole Screen Replaces GB/T5330-1985 Industrial Metal Wire Weaving Square Hole Screen

GB/T6003-1997 Industrial metal wire woven long hole screen

GB/T5330.1-2000 Industrial metal screens and wire meshes - mesh size and wire diameter combination selection guide

GB/T 5725.-1997 Safety Net

GB/T6003.1-1997 Metal Wire Mesh Test Sieve

GB/T6003.2-1997 Metal perforated plate test sieve

GB/T6003.3-1999 Electroformed Sheet Test Sieve

GB/T 6005-1997 Basic dimensions of mesh openings of wire mesh, perforated plate and electroformed sheet for sieve testing

JB/T58951-1992 Industrial metal screens and wire mesh products.