06Cr19Ni10 Stainless Steel Wire Mesh Standards and Characteristics

06Cr19Ni10 Stainless Steel Wire Mesh Standards and Characteristics
06Cr19Ni10 Stainless Steel Wire Mesh is also known as: 06Cr19Ni10 Stainless Steel Screen, 06Cr19Ni10 Square Hole Net, 06Cr19Ni10 Screen, 06Cr19Ni10 Wire Mesh, 06Cr19Ni10 Stainless Steel Mesh, 06Cr19Ni10 Filter Net, 06Cr19Ni10 Metal Wire Weaving Square Hole Screen, 06Cr19Ni10 Stainless Steel Weaving Net, 06Cr19Ni10 Vibrating Screen, 06Cr19Ni10 Crimped Net.
06Cr19Ni10 Stainless Steel Wire Mesh Material Execution Standard: GB/T20878-2007 Product Introduction
JIS G4303:2005
06Cr19Ni10 is a high alloy steel that can resist corrosion in air or chemical corrosive media.
The surface and corrosion resistance are good. It does not need to be treated by surface treatment such as color plating, but the inherent surface properties of stainless steel are brought into play. It is a kind of steel used in many aspects, usually called stainless steel. Representative performance includes 13 chrome steel, 18-8 chrome-nickel steel and other high alloy steels.
The mechanism of stainless steel rust prevention is that the alloy elements form a dense oxide film, which isolates oxygen contact and prevents further oxidation. Therefore, stainless steel is not "stainless".
There may be several reasons for the rust of 06Cr19Ni10 material:

1. Chloride ions exist in the use environment. Chloride ions are widely present, such as salt, sweat, sea water, sea breeze, soil, etc. Stainless steel corrodes very quickly in the environment with chloride ions, even more than ordinary low-carbon steel. Therefore, there are requirements for the use environment of stainless steel, and it needs to be wiped frequently to remove dust and keep it clean and dry. (In this way, it can be classified as "improper use".) There is an example in the United States: a company uses an oak container to hold a solution containing chloride ions. The container has been used for nearly a hundred years. In the 1990s, it was planned to be replaced. Because the oak material is not modern enough, the container leaked due to corrosion 16 days after it was replaced with stainless steel.
2. No solid solution treatment. The alloy elements are not dissolved into the matrix, resulting in low alloy content in the matrix and poor corrosion resistance.
3. This material without titanium and niobium has a natural tendency to intergranular corrosion. Adding titanium and niobium, combined with stabilization treatment, can reduce intergranular corrosion. Stainless steel is a high-alloy steel that can resist corrosion in air or chemical corrosive media. It has a beautiful surface and good corrosion resistance. It does not need to undergo surface treatment such as plating, but exerts the inherent surface properties of stainless steel. It is a kind of steel used in many aspects and is usually called stainless steel. Representative performance includes 13 chromium steel, 18-8 chromium-nickel steel and other high-alloy steels. From the perspective of metallography, because stainless steel contains chromium, a very thin chromium film is formed on the surface. This film isolates the oxygen that invades the steel and plays a corrosion-resistant role. In order to maintain the inherent corrosion resistance of stainless steel, the steel must contain more than 12% chromium.

06Cr19Ni10 is a general-purpose stainless steel that is widely used in the manufacture of equipment and parts that require good comprehensive performance (corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, the steel must contain more than 12% chromium.
06Cr19Ni10 stainless steel is a grade of stainless steel produced in accordance with the American ASTM standard.
06Cr19Ni10 is the most widely used stainless steel and heat-resistant steel. It is used in food production equipment, general chemical equipment, nuclear energy, etc.
06Cr19Ni10 stainless steel wire mesh performance: 06Cr19Ni10 stainless steel is the most widely used chromium-nickel stainless steel with good corrosion resistance, heat resistance, low temperature strength and mechanical properties. It is corrosion-resistant in the atmosphere. If it is an industrial atmosphere or a heavily polluted area, it needs to be cleaned in time to avoid corrosion. It is suitable for food processing, storage and transportation. It has good processing performance and weldability. Plate heat exchangers, bellows, household goods, building materials, chemicals, food industry, etc.