Inconel600 alloy wire mesh Introduction to Characteristics and Applications

Inconel600 alloy wire mesh Introduction to Characteristics and Applications

Inconel600 alloy wire mesh is also known as Inconel600 filter mesh, Inconel600 woven mesh, Inconel600 screen mesh, Inconel600 square hole mesh, Inconel600 punching plate, Inconel600 diamond mesh, Inconel600 metal wire mesh, Inconel600 filter mesh, etc.

Types of Inconel600 alloy wire mesh: Inconel600 woven mesh, Inconel600 punched mesh, Inconel600 steel plate mesh, Inconel600 welded mesh, Inconel600 crimped mesh, Inconel600 filler mesh, Inconel600 wire mesh demister, Inconel600 plain mesh, Inconel600 twill mesh, Inconel600 stainless steel mesh belt, etc.

Inconel601 alloy is a nickel-chromium-iron based solid solution strengthened alloy with good high temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding performance, and satisfactory thermal strength and high plasticity below 700°C. The alloy can be strengthened by cold working, and can also be connected by resistance welding, fusion welding or brazing. It is suitable for making oxidation-resistant parts that bear low loads below 1100°C.

Inconel 601 corresponding grades: UnS n06601, W.nr.2.4851, nSN089043/ nS313, 1Cr23ni60Fe13Al, nCF601 (Japan)

Characteristics of Inconel 601 alloy: 1. Excellent oxidation resistance at high temperature; 2. Good carburization resistance; 3. Good oxidation resistance in sulfur-containing atmosphere; 4. Good mechanical properties at both room temperature and high temperature; 5. Good resistance to stress corrosion cracking. Due to the control of carbon content and grain size, 601 has higher creep rupture strength, so 601 is recommended for use in areas above 500°C.

Inconel 601 alloy corrosion resistance:

An important property of 601 alloy is its oxidation resistance at temperatures up to 1180°C. Even under very harsh conditions, such as heating and cooling cycles, 601 can form a dense oxide film and obtain high spalling resistance. 601 has good carburization resistance. Due to its high chromium and aluminum content, 601 has good oxidation resistance in high-temperature sulfur-containing atmospheres.

Alloy application range Application field:Edit

1. Trays, baskets and fixtures used in heat treatment plants.

2. Wire strand annealing and radiation tubes, high-speed gas burners, wire mesh belts in industrial furnaces.

3. Isolation tanks in ammonia reforming and catalytic support grids in nitric acid production.

4. Exhaust system components

5. Combustion chamber of solid waste incinerator

6. Pipe support and ash handling department.

Inconel600 alloy wire mesh application areas:

● Thermocouple sleeves in corrosive atmospheres;

● Vinyl chloride monomer production: resistance to chlorine, hydrogen chloride, oxidation and carbonization corrosion;

● Uranium oxidation conversion to hexafluoride: resistance to hydrogen fluoride corrosion;

● Production and use of corrosive alkali metals, especially in environments using sulfides;

● Production of titanium dioxide using chlorine;

● Production of organic or inorganic chlorides and fluorides: resistance to chlorine and fluorine corrosion;

●Nuclear reactors;

●Retorts and components in heat treatment furnaces, especially in carburizing and nitriding atmospheres;

●Catalytic regenerators in petrochemical production are recommended to use alloy 600H in applications above 700℃ to obtain a longer service life.