Introduction to the classification, material and structure of foam breaking net demister

Introduction to the classification, material and structure of foam breaking net demister. Foam
breaking net is also known as wire mesh demister, wire mesh demister and wire mesh foam catcher.
Wire mesh demister can be divided into: stainless steel wire mesh demister, 304 wire mesh demister, 304L wire mesh demister, 304 wire mesh demister, 321 wire mesh demister, 316L wire mesh demister, 316 wire mesh demister, PP wire mesh demister, PE wire mesh demister, F4 wire mesh demister, F46 wire mesh demister, Monel wire mesh demister, Hastelloy demister, titanium wire mesh demister, nickel wire mesh demister, copper-nickel alloy wire mesh demister, etc. 
Wire mesh demister can be divided into: HG5-1404, HG5-1404, HG5-1404 standard wire mesh demister (riser pipe type wire mesh demister, reduced diameter wire mesh demister, full diameter wire mesh demister); HG/T21586-1998 Drawer type wire mesh demister; HG/T21618-1998 wire mesh demister (SP wire mesh demister, DP wire mesh demister, HP wire mesh demister, HR wire mesh demister); wave type wire mesh demister, standard wire mesh demister, high efficiency wire mesh demister, high penetration wire mesh demister, etc. Wire mesh demister

material types and performance
0Cr19Ni9 is the most widely used stainless heat-resistant steel, food equipment, general chemical equipment. 
00Cr19Ni11 is a steel with lower carbon content than 0Cr19Ni9, and has superior intergranular corrosion resistance. 
0Cr23Ni13 has better corrosion resistance and heat resistance than 0Cr19Ni9. 0Cr25Ni20 has better oxidation resistance than 0Cr23Ni13. In fact, it is mostly used as heat-resistant steel.
0Cr17Ni12Mo2 has better corrosion resistance than 0Cr19Ni9 in seawater and other various media. Good. Mainly used as pitting corrosion resistant material
0Cr18Ni12Mo2Ti is used in equipment resistant to sulfuric acid, phosphoric acid, formic acid and acetic acid, and has good resistance to intergranular corrosion
00Cr17Ni14Mo2 is an ultra-low carbon steel of 0Cr17Ni12Mo2, which has better intergranular corrosion resistance than 0Cr17Ni12Mo2
. 0Cr18Ni11Ti adds Ti to improve intergranular corrosion resistance. 
1Cr18Ni11Si4A1Ti (NS-80) is used to make parts and equipment resistant to high-temperature concentrated nitric acid
. 00Cr20Ni25Mo4.5Cu steel is mainly developed to solve the corrosion of sulfuric acid. It is also resistant to acetic acid corrosion at any concentration and temperature under normal pressure. It also has good corrosion resistance in formic acid, phosphoric acid, and a mixed acid of formic acid and acetic acid.