Introduction to types, specifications and punching methods of punching mesh

Introduction to the types, specifications and punching methods of punched mesh
Most of the raw materials used in punched mesh include: stainless steel, low carbon steel plate, galvanized PVC cold-rolled coil, etc.
The types are divided into: pattern punching mesh, formed punching mesh, extra thick punching mesh, extra thin punching mesh, micro hole punching mesh, and line cutting punching mesh. Laser punching mesh, etc.

Hole Type Specifications
The main specifications of punching nets include rectangular holes, square holes, diamond holes, round holes, oblong holes, hexagonal holes, cross holes, triangular holes, long waist holes, plum blossom holes, fish scale holes, pattern holes, and eight-character nets. , herringbone holes, five-pointed star holes, irregular holes, drum holes, special-shaped holes, louver holes, etc.
1. The thickness of the rolled plate is 0.2mm-1mm, the length is 20m
2. The aperture is 1.5mm-10mm
3. The thickness of the sheet is 0.2mm-20mm; width*length≤1.5m*5m
4. The aperture is 0.5mm-200mm

Punching method
1. Continuous punching in the same direction: Using the partially overlapping processing method of the rectangular punching mesh mold, long holes, trimming, etc. can be processed.
2. Continuous forming: forming processing methods that are larger than the punching mesh mold, such as large-size blinds, rolled ribs, rolled steps and other processing methods.
3. Nibbling: A processing method that uses a small round die to continuously punch arc shapes in smaller steps.
4. Multi-directional continuous punching: a processing method that uses a small punching mesh mold to process large holes.
5. Single forming: a processing method of shallow drawing and forming according to the shape of the mold.
6. Single punching: Complete punching in a single pass, including punching of linear distribution, arc distribution, circumferential distribution, and grid holes.
7. Array forming: Processing of multiple identical or different workpieces on a large plate.