310S Knitted wire mesh

310S Knitted wire mesh introduction

310S Knitted metal mesh,also known as 310S double-layer stainless steel wire mesh,310S crochet metal wire mesh,310S Knitted woven wire mesh,310S stainless steel mesh sleeve metal wire mesh,310S Stainless Steel Knitted Wire Mesh Tube,310S Stainless Steel Knitted Wire Mesh,310S Knitted Wire Mesh,310S Knitted Mesh Fabric,310S Knitted Wire Mesh Rolls,310S Ginning Knitted Mesh,310S Multi-Strand Knitted Mesh,310S Stainless Steel Knitted Mesh,310S Copper Knitted Mesh,310S Knitted Wire Mesh,310S Knitted Mesh,310S SP standard wire mesh,310S foam breaking mesh,310S flat wire stainless steel wire mesh,310S stainless steel defoamer wire mesh,310S metal wire mesh defoamer wire mesh,310S flame arrester wire mesh,310S vapor liquid filter mesh,310S gas-liquid mesh,310S flat wire filter wire mesh,etc.

310S corresponds to different standards：

GB /T 20878-2007 Stainless and heat-resisting steels - Designation and chemical composition:310S/S31008/06Cr25Ni20(0Cr25Ni20)；

GB /T 1221-2007 Heat-resistant steel bars:310S/S31008/06Cr25Ni20(0Cr25Ni20);

GB /T 4240-2019 Stainless steel wire:310S/S31008/06Cr25Ni20(0Cr25Ni20);

ASTM A580/A580M-2018 Stainless Steel Wire:310S/S31008;

ASTM A 276-2017 Stainless Steel Bars and Shapes:310S/S31008;

310S Knitted wire mesh Chemical element content (%)

310S Knitted wire mesh introductionMaterial grade comparison table

There are four types of knitted metal mesh, namely SP type, DP type, HP type, HR type. It should be specified which type of gas-liquid filter mesh to use. The specifications of the gas-liquid filter screen for the wire mesh defoamer include: HG5-1404 HG5-1405、HG5-1406、 The standard number is Shanghai Q/SG12-1-79. The standard specifies three types of gas-liquid networks, namely standard, high-efficiency, and high penetration. For various non-standard woven nets provided by users, such as multi strand weaving, various shapes of sealing gaskets, sleeves, etc., we can customize according to the size of the mesh and the thickness of the wire diameter.

Knitted metal mesh wire diameter range: flat or round wire with a diameter of 0.08-0.5mm. Single strand weaving, multi strand weaving, metal wire and non-metallic wire (various fibers) weaving, etc. can be pressed and rolled on the wire mesh to create various styles and specifications of corrugated shapes, such as "herringbone" patterns.

Common specifications and models of knitted metal mesh:

Width: 1''-79'', which is 25.4mm-2006.6mm.

Length: Can be customized according to needs (1-3000m).

Knitted metal mesh parameters

1. Silk warp range: 0.10mm-0.8mm (commonly used warp is 0.20mm-0.25mm). In addition, multiple strands of silk are twisted together to weave.

2. Hole size: From (2 x 3mm) to (4 x 5mm) and then to (12 x 6mm). Additionally, the hole size can be adjusted according to customer requirements. The opening form is a cross arrangement of large and small holes (the size of the holes in the length direction is consistent, but the width is different)

3. Surface condition of gas-liquid filter screen: flat mesh surface and corrugated mesh surface pressed into waves (the width and depth of the waves have different specifications)

4. The width range of gas-liquid filter screen: 40mm, 80mm, 100mm, 150mm, 200mm, 300mm, 400mm, 500mm, 600mm,800mm,1000mm,1200mm,1400mm,1500mm，1800mm,2000mmetc.

The main purpose of knitted metal mesh is to process defoamers and separate liquid droplets inside the gas. It can also be extruded for manufacturing filtration equipment. Widely used in industries such as chemical, petroleum, pharmaceuticals, light industry, metallurgy, machinery, construction, aviation, shipping, and environmental protection. It is also widely used in various tower equipment such as vacuum towers, absorption towers, separation tanks, gas separators, compression absorption tanks, evaporators, washing towers, distillation towers, recovery containers, dust collection devices, etc.