C-276, B2, B3, Monel 400, 904L, 316L stainless steel wire mesh product performance introduction and specification characteristics

C-276, B2, B3, Monel 400, 904L, 316L Stainless Steel Wire Mesh Product Performance Introduction and Specifications
 
C-276, B2, B3, Monel 400, 904L, 316L Wire Specifications: φ0.10-12mm
C-276, B2, B3, Monel 400, 904L, 316L Wire Stainless Steel Wire Mesh Mesh: 180 mesh-8 mesh
Hastelloy Wire Mesh
Grade: hastelloyC-276 hastelloyB-
3Weaving method: plain, twill
Hastelloy is a nickel-based alloy, which is the most corrosion-resistant one of modern metal materials. It is mainly resistant to wet chlorine, various oxidizing chlorides, chloride salt solutions, sulfuric acid and oxidizing salts, and has good corrosion resistance in low and medium temperature hydrochloric acid. Therefore, it has a wide range of applications in harsh corrosive environments, such as chemical, petrochemical, seawater exchanger flue gas desulfurization equipment, pulp and papermaking, environmental protection and other industrial fields.

Monel wire mesh Monel filter MONEL MESH
Material: NO4400 NO5500 NO4405
Mesh: 0.1--300 mesh
Features: It is a nickel-based alloy material with good corrosion resistance in seawater, chemical solvents, ammonia sulfur chlorine, hydrogen chloride, various acidic media such as sulfuric acid, hydrofluoric acid, hydrochloric acid, phosphoric acid, organic acids, alkaline media, salts and molten salts. Product use: Applicable to chemical and petrochemical industries and marine development. It can be used to manufacture various heat exchange equipment, boiler feed water heaters, various pressure vessel equipment. Petroleum and chemical pipelines, containers, towers, tanks, valves, pumps, reactors, shafts, etc.

904L wire mesh has good activation-passivation transformation ability and excellent corrosion resistance. It has good corrosion resistance in non-oxidizing acids such as sulfuric acid, acetic acid, formic acid and phosphoric acid, and has good pitting resistance in neutral chloride ion media. It also has good resistance to crevice corrosion and stress corrosion. It is suitable for various concentrations of sulfuric acid below 70°C. It also has good corrosion resistance in acetic acid of any concentration and any temperature under normal pressure, as well as in the mixed acid of formic acid and acetic acid.

904L wire mesh is applicable to: petroleum and petrochemical equipment, sulfuric acid storage and transportation equipment, scrubbers and fans in organic acid treatment systems, pharmaceutical plant centrifuge reactors, seawater treatment devices, paper industry equipment and other fields and industries. 316L

wire mesh
316L is a molybdenum-containing stainless steel. Due to the molybdenum content in the steel, the overall performance of this steel is better than that of 310 and 304 stainless steel. Under high temperature conditions, when the concentration of sulfuric acid is lower than 15% and higher than 85%, 316L stainless steel has a wide range of uses. 316L stainless steel also has good chloride corrosion resistance. Excellent pitting resistance and high temperature creep strength.


Alloys: Monel alloy mesh, Hastelloy mesh, Inconel alloy mesh, iron-chromium-aluminum wire mesh and nickel-chromium alloy wire mesh, etc.
Widely used are: iron-chromium-aluminum OCr25A15, 0Cr27Al7Mo2; nickel-chromium alloy Cr15Ni60, Cr20Ni80, Cr20Ni35, Cr20Ni30; stainless steel 310S, 321, 316; duplex stainless steel 2205, 904L; Hastelloy C-276, B-2; Monel 400, 500; Inconel 600, 601, 625, 800, 825; nickel foam, etc.
Its product features are: high temperature resistance, acid and alkali resistance, corrosion resistance, high resistivity, small resistance temperature coefficient, strong processing ability, good elasticity, etc. It is widely used in petroleum, chemical industry, rubber, automobile industry, screening particles, filtering gas, liquid, etc. Rare light metals: including lithium, rubidium, cesium, beryllium. It has a small specific gravity and strong chemical activity. Rare refractory metals: including titanium, zirconium, hafnium, vanadium, niobium, tantalum, molybdenum, tungsten. It has a high melting point and is a compound formed with carbon, nitrogen, silicon, boron, etc.