316L stainless steel wire mesh specifications and characteristics

316L stainless steel wire mesh is also known as 316L stainless steel mesh, 316L stainless steel filter mesh, 316L stainless steel woven mesh, 316L stainless steel screen, 316L wire mesh, 316L screen, 316L steel mesh, and high-efficiency stainless steel mesh.

316L stainless steel. Titanium steel new grade: 022Cr17Ni12Mo2

Adding Mo (2~3%), excellent corrosion resistance, high temperature resistance and creep resistance.

316L stainless steel wire mesh product specifications: 316L stainless steel wire mesh has 636 mesh, 600 mesh, 500 mesh, 450 mesh, 400 mesh, 350 mesh, 325 mesh, 300 mesh, 280 mesh, 250 mesh, 200 mesh, 180 mesh, 150 mesh, 100 mesh, 80 mesh, 60 mesh, and 50 mesh.

The width of 316L stainless steel wire mesh is 0.914m, 1m, 1.22m, 1.3m, 1.4m, 1.5m, 1.6m, 2m. Its material is 316L.

316L stainless steel wire mesh features acid resistance, alkali resistance, high temperature resistance, strong tension and wear resistance. It is used for screening and filtering in acid and alkali environments, as mud mesh in the petroleum industry, as sieve mesh in the chemical and chemical fiber industry, and as pickling mesh in the electroplating industry.

316L stainless steel wire mesh features:

1) The cold-rolled product has good gloss and beautiful appearance;

2) Due to the addition of Mo, the corrosion resistance, especially the pitting resistance, is excellent;

3) Excellent high temperature strength

4) Excellent work hardening (weak magnetic properties after processing)

5) Non-magnetic in solid solution state;

6) Compared with 304 stainless steel, the price is higher.

316L is a type of stainless steel containing molybdenum. Due to the molybdenum content in the steel, the overall performance of this type of steel is better than that of 310 and 304 stainless steel. Under high temperature conditions, when the concentration of sulfuric acid is lower than 15% or higher than 85%, 316L stainless steel has a wide range of uses. 316L stainless steel also has good resistance to chloride corrosion, so it is usually used in marine environments.

The maximum carbon content of 316L stainless steel is 0.03, and it can be used in applications where annealing cannot be performed after welding and maximum corrosion resistance is required.

1. Corrosion resistance

The corrosion resistance is better than that of 304 stainless steel, and it has good corrosion resistance in the production process of pulp and paper. Moreover, 316L stainless steel is also resistant to the erosion of the ocean and corrosive industrial atmosphere.

2. Heat resistance

316L stainless steel has good oxidation resistance in intermittent use below 1600 degrees and continuous use below 700 degrees. In the range of 800-1575 degrees, it is best not to use it continuously. 316L stainless steel, but when 316L stainless steel is used continuously outside this temperature range, the stainless steel has good heat resistance. 316L stainless steel has better resistance to carbide precipitation than 316 stainless steel and can be used in the above temperature range.

3. Heat treatment

Solution annealing is carried out in the temperature range of 1010-1150 degrees, followed by rapid cooling. 316L stainless steel cannot be hardened by overheating.

4. Welding

316L stainless steel has good welding properties. It can be welded by all standard welding methods. Depending on the application, 316Cb, 316L or 309Cb stainless steel filler rods or electrodes can be used for welding. In order to obtain the best corrosion resistance, the welded section of 316 stainless steel needs to be annealed after welding. If 316L stainless steel is used, post-weld annealing is not required.

316L stainless steel mechanical properties:

Tensile strength (Mpa) 485 MIN Yield strength (Mpa) 170 MIN Elongation (%) 30 MIN Area reduction (%) 40 MIN The density of 316L stainless steel is 7.98g/cm3, and the hardness is HRB<90 HV<200 HBS<187