Inconel600/UNS N06600 alloy wire mesh brand international name, implementation standards, characteristics and uses

Inconel600/UNS N06600 alloy wire mesh brand international name, implementation standards, characteristics and uses

Inconel600/UNS N06600 alloy wire mesh is also known as Inconel600 woven mesh, Inconel600 filter mesh, Inconel600 screen mesh, and Inconel600 square hole mesh.

International common names: INCONEL Alloy 600, UNS N06600, NS312, W.-Nr.2.4816, NCF 600, NAS 600, Nicrofer 7216 Alloy 600, ATI 600

Inconel600/UNS N06600 alloy wire mesh implementation standards: ASTM B168/ASME SB-168, ASTM B166/ASME SB-166, ASTM B167/ASME SB-167, ASTM B163/ASME SB-163, ASTM B564/ASME SB-564

Main ingredients: Carbon (C) ≤ 0.015, Manganese (Mn) ≤ 1.00, Nickel (Ni) ≥ 72, Silicon (Si) ≤ 0.5 Phosphorus (P) ≤ 0.015, Sulfur (S) ≤ 0.015, Chromium (Cr) 14.0～ 17.0, iron (Fe) 6.0～10.0, aluminum (Al) ≤0.3, titanium (Ti) ≤0.3, copper (Cu) ≤0.5

Physical properties: 600 alloy density: 8.47g/cm3, melting point: 1370-1470 ℃, magnetic properties: none

Heat treatment: heat preservation between 980-1150℃ for 1-2 hours, rapid air cooling or water cooling.

Mechanical properties: tensile strength: σb≥550Mpa, yield strength σb≥240Mpa: elongation: δ≥30%, hardness ≤100 (HRB)

Corrosion resistance and main use environment:

INCONEL 600 is a nickel-chromium-iron-based solid solution strengthened alloy with good high-temperature corrosion resistance (acid and alkali resistance) and oxidation resistance, excellent hot and cold processing and welding process performance, and satisfactory thermal strength below 700°C. properties and high plasticity.

This alloy is designed for low temperature to 1093°C environments. The oxidation resistance at high temperatures is extremely excellent, and it has good oxidation resistance and carbonization resistance stability at 1093°C (but in a reducing atmosphere containing hydrogen sulfide, its upper limit temperature is 535°C).

It is very effective in treating hydrogen chloride and chlorine gas at high temperatures; hydrogen chloride can reach about 538℃, and chlorine gas can be used safely up to 510℃. This alloy also has excellent corrosion resistance against nitrogen, hydrogen and carburizing, so it is used in various heat treatment furnaces.

Inconel600/UNS N06600 alloy wire mesh application fields include: retort furnaces, muffle furnaces and heat treatment fixtures and baskets, vacuum furnace devices, chlorination equipment with a maximum working temperature of 1000 degrees Fahrenheit, titanium dioxide factories, retort furnaces, and fatty acid processes Heaters, distillers, bubble columns and condensers, evaporator tubes, tube sheets and tableting trays in sodium sulfide manufacturing processes, rosin acid treatment equipment in pulp manufacturing, etc.