Introduction to the types, material grades and characteristics of stainless steel screens

Introduction to the types, material grades and characteristics of stainless steel screens
Material: SUS302, 304, 316, 304L, 316L, 310, 310S and other stainless steel wires.
Weaving and characteristics: plain weave, twill weave, mat-type dense weave, with acid resistance, alkali resistance, temperature resistance, wear resistance and other properties.
Application: used in mining, petroleum, chemical, food, medicine, machinery manufacturing and other industries.
Stainless steel screen, also known as stainless steel wire mesh, includes stainless steel square mesh and stainless steel twill mesh.
Stainless steel screen has the characteristics of wear resistance, heat resistance, acid resistance and corrosion resistance. Due to these characteristics, stainless steel screen is used in many fields such as mining, chemical industry, food industry and pharmaceutical industry.

Types, grades, characteristics and uses of stainless steel wire for various stainless steel woven screens:
1 1Cr17Mn6Ni5N (201) Nickel-saving steel, replacing grade 1Cr17Ni7, magnetic after cold working. For railway vehicles.
2 1Cr18Mn8Ni5N (202) Nickel-saving steel, replacing grade 1Cr18Ni9
3 1Cr17Ni7 (301) High strength after cold working. Railway vehicles, conveyor belts, bolts and nuts
4 1Cr18Ni9 (302) High strength after cold working, but the elongation is slightly worse than 1Cr17Ni7. Decorative parts for buildings.
5 Y1Cr18Ni9 (303) Improve cutting and ablation resistance. Most suitable for automatic lathes. Bolts and nuts
6 Y1Cr18Ni9Se (303Se) Improve cutting and ablation resistance. Most suitable for automatic lathes. Rivets, screws
7 0Cr19Ni9 (304) As the most widely used stainless heat-resistant steel, it is used in food equipment, general chemical equipment, and atomic energy industry
8 00Cr19Ni10 (304L) Steel with lower carbon content than 0Cr19Ni9, superior resistance to intergranular corrosion, and is a type of component that does not require heat treatment after welding
9 0Cr19Ni9N (304N1) Add N to the grade 0Cr19Ni9, which increases strength without reducing plasticity. Reduce the thickness of the material. As structural strength components
10 0Cr19Ni10NbN (304N2) Add N and Nb to the grade 0Cr19Ni9, with the same characteristics and uses as 0Cr19Ni9N
11 00Cr18Ni10N (304LN) Add N to the grade 00Cr19Ni11, with the same characteristics as the above grades, the same uses as 0Cr19Ni9N, but better resistance to intergranular corrosion
12 1Cr18Ni12 (305) Compared with 0Cr19Ni9, work hardening. Spinning, special drawing, cold heading
13 0Cr23Ni13 (309S) has better corrosion resistance and heat resistance than 0Cr19Ni9
14 0Cr25Ni20 (310S) has better oxidation resistance than 0Cr23Ni13. In fact, it is mostly used as heat-resistant steel
15 0Cr17Ni12Mo2 (316) has better corrosion resistance than 0Cr19Ni9 in seawater and other media. Mainly used as pitting corrosion resistant material
16 0Cr18Ni12Mo2Ti (316Ti) is used for equipment resistant to sulfuric acid, phosphoric acid, formic acid and acetic acid, and has good intergranular corrosion resistance
17 00Cr17Ni14Mo2 (316L) is an ultra-low carbon steel of 0Cr17Ni12Mo2, and has better intergranular corrosion resistance than 0Cr17Ni12Mo2
18 0Cr17Ni12Mo2N (316N) adds N to the grade 0Cr17Ni12Mo2 to increase the strength without reducing the plasticity, making the material thinner. For parts with better corrosion resistance and higher strength
19 00Cr17Ni13Mo2N (316LN) Adds N to the grade 00Cr17Ni14Mo2, has the same characteristics as the above grades, and has the same uses as 0Cr17Ni12Mo2, but has better resistance to intergranular corrosion
20 0Cr18Ni12Mo2Cu2 (316JI) Corrosion resistance and pitting corrosion resistance are better than 0Cr17Ni12Mo2. Used for sulfuric acid resistant materials
21 00Cr18Ni14Mo2Cu2 (316JIL) is an ultra-low carbon steel of 0Cr18Ni12Mo2Cu2, which has better resistance to intergranular corrosion than 0Cr18Ni12Mo2Cu2
22 0Cr19Ni13Mo3 (317) has better resistance to pitting corrosion than 0Cr17Ni12Mo2.
23 00Cr19Ni13Mo3 (317L) is an ultra-low carbon steel of 0Cr19Ni13Mo3, which has better intergranular corrosion resistance than 0Cr19Ni13Mo3 .
24 0Cr18Ni16Mo5 (317L) Heat exchangers that absorb chloride ion solutions, acetic acid equipment, phosphoric acid equipment, bleaching equipment, etc., used in environments where 00Cr17Ni14Mo2 and 00Cr17Ni13Mo3 are not applicable.
25 1Cr18Ni9Ti (321) For welding, anti-magnetic instruments, medical equipment, acid-resistant containers and equipment linings, pipelines and other equipment and parts. Ti is added to improve intergranular corrosion resistance. It is not recommended as a decorative component.
26 0Cr18Ni11Nb (347) Contains Nb to improve intergranular corrosion resistance
. 27 00Cr20Ni25Mo4.5Cu (904L) Super austenitic stainless steel is a low carbon, highly alloyed austenitic stainless steel designed for environments with harsh corrosive conditions. It has a high resistance to pitting corrosion.
28 0Cr17Ni4Cu4Nb (630) is a martensitic precipitation hardening stainless steel. Its performance characteristics are that the strength level can be easily adjusted by changing the heat treatment process. It has strong corrosion fatigue and water drop resistance.
29 17-4HP (631) has the same performance as 630 stainless steel. It is a martensitic precipitation hardening stainless steel. Its performance characteristics are that the strength level can be easily adjusted by changing the heat treatment process. It has stronger corrosion fatigue and water drop resistance than 630。